Diaphragm Valve



Diaphragm Valve

Diaphragm Valve

Diaphragm Valve


 

>> General

Series DRD-01 Diaphragm Valves Are Used On Shut-Off And Throttling Service For Liquids, Slurries And Vacuum/Gas.

The Seal Is Achieved By A Flexible Membrane, Usually Elastomer, And Possibly Reinforced With A Metal Part. The Membrane Is Tensed By The Effect Of A Stem/Compressor With Lineal Movement Until Contact Is Made Against The Seal Of The Body.

The Operating Parts Of The Diaphragm Valve Are Isolated From The Flow. This Makes This Valve Suitable For Viscous Flows And Also Hazardous, Abrasive And Corrosive Flows As Its Sealing System Avoids Any Contamination Towards Or From The Environment.

Diaphragm Valves Are Available In A Wide Variety Of Metals, Solid Plastics, Plastic, Rubber And Glass Linings. They Are Well Suited To The Handling Of Multiple Chemical Applications Both Clear Fluids As Well As Slurries.

The Diaphragm Valve Has An Extended Use For Applications At Low Pressures And Slurry Fluid Where Most Other Kinds Of Valves Corrode Or Become Obstructed.

It Is A Quick Opening Valve.

>> Specifications

Valve Model Series DRD
Valve Type Weir Type, Straight Type
Valve Size 1/2"(15A) ~ 8"(200A)
Valve Rating

ANSI 150#

JIS 10K

PN 10

End Connection RF, FF, and so on
Body Material GGG40, A216WCB, A351CF8 and so on
Lined Material Rubber, Teflon and so on
Bonnet Type Plain (-17℃ to 180℃)
Flow Characteristic Quick Opening
Leakage Class Rated ANSI Class V, VI
Actuator Combination Diaphragm Actuator, Piston Cylinder Actuator, Electric Actuator



TOP

Company Name : DR VALVE | Adress : 7, Gahyeonsan-ro 23beon-gil, Seo-gu, Incheon, Republic of Korea1
Tel : +82.32-565-1538 | Fax : +82.32-564-9176 | e-mail : drv@dr-valves.com

Copyright © DR VALVE All rights reserved.